Even lighter, even more compact, and ideal as a spare, the S-Tubo-MTB tubes were developed to have a minimum possible packaging size. With a removable valve stem, the tubes have a size of only Ø3.5cm x 5cm height when packaged. The puncture resistance is the same as with standard butyl rubber tubes but with a weight of only 45g (for 29"). - 42mm valve length

At a featherweight 23g, the super-compact (when rolled up) S-Tubo-Road tubes stand out with very low rolling resistance which outpaces standard rubber tubes. With a 78% smaller packed size and the same puncture resistance as standard tubes, the S-Tubo-Road is the perfect choice as a spare and can be the crucial factor when you’re riding long and hard. - Ready for disc brakes (not suitable for rim brakes)

Aim higher: at 54% lighter, 2x more puncture-resistant, and 50% smaller packed size compared to standard rubber tubes, Tubo-BMX tubes jump to new heights. - 40mm valve length

Minimum weight and maximum protection: Tubo-MTB-Plus tubes are optimized for tire widths from 2.5" to 3.0", today’s standard for E-MTBs. Their low weight of 105g (for 27.5+) increases your battery life, and they're also a lightweight alternative to tubeless setups. - 42mm valve length

For 29er tires, more than 100g per wheel can be saved with Tubo tubes compared to standard butyl tubes—and almost twice as much space when packaged. Their riding safety is twice as high as for standard tubes and offers maximum protection against a breakdown. The assembly is just as easy as standard tubes. Tubolito tubes are also a lightweight alternative to a tubeless setup. - 42mm valve length

Super light at only 38g, the Tubo-ROAD-700c makes racing bikes even lighter. It's 70g lighter compared to a standard tube, a decisive success factor both over challenging long distances and when it comes to seconds. Suitable for disc and rim brake wheels.

- Butyl rubber - Schrader valve - 20 x 4 1/4 - Fits the rear tires on high-rise bicycles like Schwinn's Sting-Ray

Giant's downhill tubes are super burly to withstand all the DH abuse you can dish out.

Giant's downhill tubes are made from super burly rubber to withstand all the DH abuse you can dish out.

Giant's inner tubes are made from high-quality, standard weight rubber so you can keep on rolling. - Removable valve core

Giant's inner tubes are made from high-quality, standard weight rubber so you can keep on rolling. - Valve length: 35mm

The Kenda 35mm (Schrader valve) is made from butyl rubber. Kenda bicycle tubes are engineered to keep you on the right path.

• 2.25mm wall thickness • ISO Diameter: 507 / 24" BMX • ISO Width (mm): 60 mm , 61 mm , 62 mm , 63 mm , 64 mm , 65 mm , 66 mm , 67 mm , 68 mm , 69 mm • Labeled Size: 24 x 2.4-2.75 • Tube Compound: Butyl • Valve: Standard Schrader • Valve Core: Removable • Valve Length: Schrader • Valve Shaft: Smooth • Weight: 581g

Our Standard Presta Valve Tubes feature a molded method of construction that ensures a consistent thickness of butyl rubber. This means that they don't have any unnecessary weight and will roll smooth, ride after ride.

Giant's inner tubes are made from high-quality, standard weight rubber so you can keep on rolling.

- Presta valve tube - 80mm valve has removable valve core

This tube features high-density rubber for fewer flats. - Valve length: 48mm

These Giant tubes include flat sealant for reduced roadside maintenance.

Nothing in the cycling world is more infuriating than flat tires. We get it, because we get them just like you. But with our Desert Protection Presta Valve Tubes, you can minimize, if not eliminate, flats at the terrible hands of debris, thorns, or whatever else is halting your rides. Starting at the basis of the construction, we designed the tube to be thicker at the outer side, the part against the tire, in order to stop pesky bits from puncturing all the way through the tube. We then make the inner side, the part against the rim, thinner in order to reduce weight. This way, you don't have to sacrifice performance in the name of protection. We didn't stop there, however, as these tubes also feature our Airlock sealant that coats the tube for permanent protection against punctures. Not only this, but the sealant is designed to work continuously in order to prevent slow leaks from occurring, so erring complete catastrophe, you won't have to worry about flatting when you're riding over debris. We even addressed the common issue of sealant pooling with a completely homogenous design, so the tire/tube combo will always roll smooth and even. - Thicker construction on the outer side (against the tire) enhances puncture protection. - Thinner construction on the inner side (against the rim) maximizes weight savings. - Sealant coats the tube for permanent protection against punctures. - Non-toxic, non-separating formula will last the life of your tube. - Designed to work continuously in order to prevent slow leaks. - Homogenous design prevents puddles with no need to shake. - Will not dry out like the many other sealants.

- ISO Diameter: 622 / road / 29" - ISO Width (mm): 23 mm , 24 mm , 25 mm - Labeled Size: 700c x 23-25 - Tube Compound: Butyl - Valve: Presta - Valve Core: Removable - Valve Shaft: Threaded - Weight: 92g (32mm), 94g (48mm), 96g (60mm), 98g (80mm)

The least expensive way to ditch 40+ grams of rotating weight is with our Turbo Talc Tubes. A patented, oversized 4.8cm valve base prevents tearing, while a partially threaded valve stem provides a clean interface with pumps. Our lightest and most supple tube offering, it's also been proven in rolling-resistance testing to reduce drag by as much as 13% per wheel. - Packed in talc for easier installation. - 4.8cm valve base prevents issues of valves tearing off. - Smooth at the top for easier pump head insertion and reduced wear on pump internals. - Thinner tube design saves approximately 40 grams of rotating weight. - Thickness: 0.6mm

The Q-Tubes Standard Line Presta Valve tubes feature QBP's widest variety of tube sizes and valve lengths with a proven record of high quality control and consistent availability - 0.9mm wall thickness - Q-Tubes Standard Line packaging features environmentally friendly soy ink printing on recycled cardboard - Labeled Size: 27.5 x 2.8-3.2 - Weight: 325 g - Valve Core: Removable - Shaft Type: Threaded - ISO Width (mm): 70 mm , 71 mm , 72 mm , 73 mm , 74 mm , 75 mm , 76 mm , 77 mm , 78 mm , 79 mm , 80 mm , 81 mm , 82 mm , 83 mm - Tube Compound: Butyl - ISO Diameter: 584 / 650b / 27.5" - Valve: Presta Short 32-40mm

- ISO Diameter: 571 / 650c - ISO Width (mm): 18 mm , 19 mm , 20 mm , 21 mm , 22 mm , 23 mm - Labeled Size: 650c x 18-23 - Tube Compound: Butyl - Valve: Presta - Valve Core: Removable - Valve Shaft: Threaded - Weight: 80g (32mm), 86g (48m & 60mm), 88g (80mm)

- ISO Diameter: 559 / 26" mtn - ISO Width (mm): 60 mm , 61 mm , 62 mm , 63 mm , 64 mm , 65 mm , 66 mm , 67 mm , 68 mm , 69 mm - Labeled Size: 26 x 2.4-2.75 - Tube Compound: Butyl - Valve: Presta - Valve Core: Removable - Valve Length: Short 32-40mm - Valve Shaft: Threaded - Weight: 283g

We're not afraid to say it—our Airlock Schrader Valve Tubes are the best performing, self-sealing bicycle tubes available. That's because they feature our powerful Airlock sealant that coats the tube for permanent protection against punctures. Not only this, but the sealant is designed to work continuously in order to prevent slow leaks from occurring, so erring complete catastrophe, you won't have to worry about flatting when you're riding over debris. We even addressed the common issue of sealant pooling with a completely homogenous design, so the tire/tube combo will always roll smooth and even. - Airlock sealant for the best chance of reducing punctures. - Non-toxic, non-separating formula. - Works continuously to prevent slow leaks. - Homogenous design prevents puddles with no need to shake. - Will not dry out like the many other sealants.

Giant's thorn tubes use thicker rubber to prevent some flats and punctures.

- ISO Diameter: 622 / road / 29" - ISO Width (mm): 23 mm , 24 mm , 25 mm - Labeled Size: 700c x 23-25 - Tube Compound: Butyl - Valve: Presta - Valve Core: Removable - Valve Shaft: Threaded - Weight: 125g (32mm), 126g (48 & 60mm), 128g (80mm)

- ISO Diameter: 507 / 24" BMX - Tube Compound: Butyl - Valve: Presta - Valve Core: Removable - Valve Length: Short 32-40mm - Valve Shaft: Threaded - Weight: 152g (1.9-2.125), 188g (2.1-2.3 & 2.4-2.75)

- Low Lead Valve - ISO Diameter: 507 / 24" BMX - Tube Compound: Butyl - Valve: Standard Schrader - Valve Core: Removable - Valve Shaft: Smooth - Weight: 150g (1.5-1.75), 156g (1.9-2.125), 180g (2.1-2.3)

- ISO Diameter: 559 / 26" mtn - Tube Compound: Butyl - Valve: Standard Schrader - Valve Core: Removable - Valve Shaft: Smooth - Weight: 102g (1-1.25), 165g (1.5-1.75), 174g (1.9-2.125), 198g (2.1-2.3), 281g (2.4-2.75)