The Custom Li-Ion Turbo Levo Battery has a 504Wh capacity and works with all Turbo Levo models. The battery also includes an ANT+/ Bluetooth module that enables the bike to work with the Specialized Mission Control App or any other ANT+ device. Lastly, it has a rock guard and all of the hardware required for installation. - Battery features a 504Wh capacity - Works for all Turbo Levo models - ANT+/Bluetooth module works with Specialized's Mission Control App and any other ANT+ device - Includes rock guard and all hardware

The EPS Power Unit is the systems source of power as well as the "brain" of the system, responsible for managing the battery pack, enabling and monitoring the front and rear derailleurs and communicating with the Interface Unit. - Weathertight, o-ring sealed connectors - Lithium Ion battery duration: 500km/month - 1500km, 1000km/month - 1800km, 2000km/month - 2000km - Water proof to 1m for 30 minutes (IP67 Rated) - Operational temperature: -4F to 140F - Charging temperature: 32F to 113F - 17mm diameter for easy seat post installation - Battery charges through the Interface Unit - Compatible only with the Super Record/Record V3 Power Unit

RockShox Reverb Service Kits - 12 of Each size Key, 3 Top Cap Assemblies, 10 Blue 1-Piece IFPs, 10 Foam Rings, 10 Inner Seal U-Cups, 10 Inner Seal Head Bushings, 10 Inner Seal Head O-Rings, 10 Strain Relief Barbs, 10 Remote Barbs, 10 Bleed Screws, 10 Air Valve Caps, 6 Seat Bolts and Nuts, 10 Main Piston O-Rings

The Supersonic bracket (previously know as the J5) is the first and premier model of the new generation Profile Design brackets. It offers easier adjustments and a greater fit range than anything that came before it. Pairing this bracket with the ergo armrest offers industry-leading fit options and greater comfort. With the 35c extensions, this aerobar is suited to riders who wish to adopt an aerodynamic arrowhead hand position. Performance - The Supersonic/Ergo platform is designed to give riders the freedom to find their best possible position with a huge range of independence adjustments. Fit Data - Armrest Offset: -85mm to -17.5mm in 7.5mm steps - Armrest Width: 124mm to 290mm in 18.5mm steps (With Extensions at 100mm) - Armrest Stack: 58.5mm (no riser kit) to 138.5mm in 5mm increments (With aftermarket Riser Kit) - There are 80 distinct position options achievable just by moving the armrests. Combine that with risers and this bar offers 1440 possible configurations. As a clip-on bar it is also possible to adjust the extension width and tilt easily. Origin The supersonic was the first of our generation brackets - resulting from careful analysis of the way riders use their aerobars and the adjustments that need to be made. The Ergo armrest is an integral part of the overall adjustability scheme. The dual-offset design (shared with Race and Boom armrest) gives the most precise adjustment range of any armrest on the market. This, along with the evenly curved shape, allows it to work well for the majority of riders. Extensions - Extension Shape: The 35c extensions offer a 35 deg ski bend shape. This facilitates a slightly turned-down wrist position to create a streamlined hand position. They are 400mm long and can be cut to size to suit nearly ever rider. They are drilled for rear-exit cable routing. - Bracket: Supersonic - Clamp Diameter: 31.8mm (26.0 w/Shims) - Armrest: Ergo / 10mm Pads - Armrest Width: 124mm to 290mm in 18.5mm steps (with Extensions at 100mm) - Armrest Offset: -85mm to -17.5mm in 7.5mm steps - Armrest Stack: The minimum is 58.5mm and the bracket is compatible with our existing risers which add up to 138.5mm stack with (70mm of spacers added)

The Supersonic bracket (previously know as the J5) is the first and premier model of the new generation Profile Design brackets. It offers easier adjustments and a greater fit range than anything that came before it. Paring this bracket with the ergo armrest offers industry leading fit options and greater comfort. Performance The Supersonic/Ergo platform is designed to give riders the freedom to find their best possible position with a huge range of independence adjustments. Fit Data - Armrest Offset: -85mm to -17.5mm in 7.5mm steps - Armrest Width: 124mm to 290mm in 18.5mm steps (With Extensions at 100mm) - Armrest Stack: 58.5mm (no riser kit) to 138.5mm in 5mm increments (With aftermarket Riser Kit) - There are 80 distinct position options achievable just by moving the armrests. Combine that with risers and this bar offers 1440 possible configurations. As a clip on bar it is also possible to adjust the extension width and tilt easily. Origin - The supersonic was the first of our generation brackets - resulting from careful analysis of the way riders use their aerobars and the adjustments that need to be made. - The Ergo armrest is an integral part of the overall adjustability scheme.The dual - offset design (shared with Race and Boom armrest) gives the most precise adjustment range of any armrest on the market. This, along with the evenly curved shape, allows it to work well for the majority of riders. Extensions - Extension Shape: The 4525c extensions offer a 45 deg lower and 25 deg upper section with a 7.5mm lateral shift per side. This allows the rider to choose between a low, short reach position or a high hands, stretched position for aerodynamics. They are 400mm long and can be cut to suit nearly every rider. They are drilled for rear-exit cable routing. - Bracket: Supersonic - Clamp Diameter: 31.8mm (26.0 w/Shims) - Armrest: Ergo / 10mm Pads - Armrest Width: 124mm to 290mm in 18.5mm steps (with Extensions at 100mm) - Armrest Offset: -85mm to -17.5mm in 7.5mm steps - Armrest Stack: The minimum is 58.5mm and the bracket is compatible with our existing risers which add up to 138.5mm stack with (70mm of spacers added)

Giant's Connect SL U-Bend Carbon Aerobar Extension is for use with Giant's Clip-On Aerobar Clamps (sold separately). This model features the U-Bend. Thanks to carbon construction, this is a featherweight and super-stiff bar. Plus, it has 70mm of fore/aft adjustment to dial in your ideal aero position.

The Subsonic/Race/35a aerobar combines the low stack Subsonic bracket with the arm-hugging Race armrest to offer an industry-leading fit range oriented towards low, narrow positions. The 35a extension offers a comfortable 35 degree angle with a 80mm rise. This is the only low stack clip-on in the market that maintains the pad-to-grip angle as the bar is stacked up Subsonic is not just another aerobar bracket. It brings our next-generation fit range to a low stack bracket design. This allows the bar to use our riser kits to increase the stack without changing the relationship between the armrest and the grips. The Race armrest has been designed to tightly cup the riders arms – facilitating a narrow position and increasing control at speed. Performance - The Subsonic/Race is designed to achieve a lower stack height than standard aerobars, without the added frontal area of a below-the-basebar extension clamping system. This improves aerodynamics and the fit range. Fit Data - Armrest offset: -85mm to -17.5mm in 7.5mm steps - Armrest Width: 142mm to 272mm in 18.5mm steps (with Extensions at 100mm) - Armrest Stack: The minimum is 40mm and the bracket is compatible with our existing risers which add up to 70mm of stack in 5mm increments. - The extension rotation can be easily adjusted using the shaft bolt. There is a 40mm range of extension length adjustment once the extensions have been cut. There are 80 distinct position options achievable just by moving the armrests. Combine that with the risers and this bar offers 1200 possible configurations. As a clip on bar it is also possible to adjust the extension width and tilt easily. This is the most adjustable low stack clip-on on the market. Origin Story After we released the Supersonic (J5) as a premium bracket with market leading fit options and verstility we wanted to bring the same kind of options to teh rest of our range of brackets and thus aerobars. Where our supersonic and Sonic brackets have a minimum stack of around 60mm, like most of the popular aerobars - we wanted the Subsonic to offer a substantially lower position. This helps the segment of the market who struggle to get into their ideal position with modern bike frames. And it was vital that we include stack height adjustment without altering the pad grip relationship - so our riders have the ability to fine-tune every aspect of their setup. The Race armrest shares the flippable design of the rest of our new generation armrests. By swapping sides or rotating the armrest, smaller increments of movement are achieved - making it simple to fine-tune a rider's position or match the position from their previous aerobar or bike. Additionally, there are two thicknesses of cushion available to ensure a snug fit for different sized arms. Who is it for - This bar is perfect for riders who wish to achieve lower positions than are possible with standard aerobar designs. Unlike other low stack bars, it allows fine-tuning of the stack height so the rider is not limited to only one armpad height. With the Race armrests fitted, it is tailored towards riders who intend to be low and narrow to punch the smallest possible hole through the wind. - Bracket: Subsonic - Clamp Diameter: 31.8mm (26.0 w/Shims) - Armrest: Race / 5mm Pads - Extension Length: 350mm - Width: 142mm to 272mm - Weight: 590g

105 piece assortment of 1-1/8-inch aluminum headset spacers. Kit includes: - 1.5mm (Silver) qty. 15 - 2.5mm (Silver) qty. 15 - 5mm (Silver) qty. 15 - 7.5mm (Silver) qty. 5 - 10mm (Silver) qty. 5 - 1.5mm (Black) qty. 15 - 2.5mm (Black) qty. 15 - 5mm (Black) qty. 15 - 7.5mm (Black) qty. 5

The Airstryke II takes the features of the ever popular Airstryke and adds an expanded fit range and more comfortable armrest. The flip up bracket and classic shape are retained. Performance The Airstryke II is intended to allow riders to add aerobars to their road or adventure bike without sacrificing the ability to hold the bars close to the stem. The comfortable grip angle and smoothly curved armrest offer a relaxed position for long days in the saddle. Fit Data - Armrest Offset: -85mm to 17.5mm in 7.5mm steps - Armrest Width: 131mm to 298mm in 18.5mm steps - Armrest Stack: 40mm Origin As one of the most popular model in the history of aerobars it seemed appropriate to update the much loved Airstryke with our new generation fit range and comfort focused armrest. We didn't want to change the elements that have made the bar so successful and the changes made just enhance the adjustability and comfort. - Bracket: L2 Flip-Up - Clamp Diameter: 31.8mm (26.0 w/Shims) - Armrest: Ergo Armrest - Armrest Stack: 40mm - Reach: -85mm to 17.5mm in 7.5mm steps - Extension Adjustment: 150mm (center of basebar - end) - Armrest Width: 155mm - 203mm - Weight: 592g

Our new Sonic bracket has been designed as the successor to the J2, which has been a somewhat ignored part of our range. With this update it brings our new generation fit range to a wider range of price points, replacing the J2 bracket. The Ergo armrest has been created to offer both a huge upgrade in fit range as well as increased rider comfort with a supportive curve to cup the arms. Performance - The Sonic/Ergo is designed to present minimal frontal area to create as little aerodynamic drag as possible. The main purpose of an aerobar is, of course, to get the rider into a fast position. Despite a fairly minimalist appearance, the Sonic/Ergo offers a comprehensive fit range for exactly this purpose. Fit Data - Armrest Offset: -70mm to -2.5mm in 7.5mm steps - Armrest Width: 124mm to 290mm in 18.5mm steps (With Extensions at 100mm) - Armrest Stack: 60mm (no riser kit) to 130mm in 5mm increments (With aftermarket Riser Kit) - The extension length and rotation can be easily adjusted using the top bolt. There are 100 distinct position options achievable just by moving the armrests. Combine that with the risers and this bar offers 1500 possible configurations. As a clip-on bar it is also possible to adjust the extension width and tilt easily. This is the most adjustable clip-on bar on the market (and in history). It is worth noting that our previous top level clip-on aerobar, the J4/F35, offered 90 possible configurations. This highlights the significant step forward we’ve made with our new generation aerobars in allowing riders to precisely adjust their position. Origin - After we released the Supersonic (J5) as a premium bracket with market-leading fit options and versatility, we wanted to bring the same kind of options to the rest of our range of brackets and thus aerobars. By simplifying the extension clamp and shifting the wing forward to the bar center line, we were able to meet our targets. As a consequence of the simplification the Sonic is the lightest of our current brackets. The Ergo armrest shares the flippable design of the rest of our new generation armrests. By swapping sides or rotating the armrests, smaller increments of movement are achieved – making it simple to fine-tune a rider's position or match the position from their previous aerobar or bike. Extensions - Extension Shape: A 35 degree ski-bend extension suited to riders who prefer to adopt a wrist angle that is on the low side of the neutral range. - The 35a is a straight 35° bend. - Bracket: Sonic - Clamp Diameter: 31.8mm (26.0 w/Shims) - Armrest: Ergo / 10mm Pads - Armrest Width: 124mm to 290mm in 18.5mm steps (with Extensions at 100mm) - Armrest Offset: -70mm to -2.5mm in 7.5mm steps - Armrest Stack: The minimum is 60mm and the bracket is compatible with our existing risers which add up to 130mm stack with (70mm of spacers added) - Weight: 559g

Our new Sonic bracket has been designed as the successor to the J2, which has been a somewhat ignored part of our range. With this update, it brings our new generation fit range to a wider range of price points, replacing the J2 bracket. The Ergo armrest has been created to offer both a huge upgrade in fit range as well as increased rider comfort with a supportive curve to cup the arms. Performance - The Sonic/Ergo is designed to present minimal frontal area to create as little aerodynamic drag as possible. The main purpose of an aerobar is, of course, to get the rider into a fast position. Despite a fairly minimalist appearance, the Sonic/Ergo offers a comprehensive fit range for exactly this purpose. Fit Data - The extension length and rotation can be easily adjusted using the top bolt. There are 100 distinct position options achievable just by moving the armrests. Combine that with the risers and this bar offers 1500 possible configurations. As a clip-on bar it is also possible to adjust the extension width and tilt easily. This is the most adjustable clip-on bar on the market (and in history). It is worth noting that our previous top level clip-on aerobar, the J4/F35, offered 90 possible configurations. This highlights the significant step forward we’ve made with our new generation aerobars in allowing riders to precisely adjust their position. Origin - After we released the Supersonic (J5) as a premium bracket with market-leading fit options and versatility, we wanted to bring the same kind of options to the rest of our range of brackets and thus aerobars. By simplifying the extension clamp and shifting the wing forward to the bar center line, we were able to meet our targets. As a consequence of the simplification the Sonic is the lightest of our current brackets. The Ergo armrest shares the flippable design of the rest of our new generation armrests. By swapping sides or rotating the armrests smaller increments of movement are achieved – making it simple to fine tune a riders position or match the position from their previous aerobar or bike. - Bracket: Sonic - Clamp Diameter: 31.8mm (26.0 w/Shims) - Armrest: Ergo / 10mm Pads - Armrest Width: 124mm to 290mm in 18.5mm steps (with Extensions at 100mm) - Armrest Offset: -70mm to -2.5mm in 7.5mm steps - Armrest Stack: The minimum is 60mm and the bracket is compatible with our existing risers which add up to 130mm stack with (70mm of spacers added) - Weight: 559g

Our new Sonic bracket has been designed as the successor to the J2, which has been a somewhat ignored part of our range. With this update, it brings our new generation fit range to a wider range of price points, replacing the J2 bracket. The Ergo armrest has been created to offer both a huge upgrade in fit range as well as increased rider comfort with a supportive curve to cup the arms. Performance - The Sonic/Ergo is designed to present minimal frontal area to create as little aerodynamic drag as possible. The main purpose of an aerobar is, of course, to get the rider into a fast position. Despite a fairly minimalist appearance, the Sonic/Ergo offers a comprehensive fit range for exactly this purpose. Fit Data - Armrest Offset: -70mm to -2.5mm in 7.5mm steps - Armrest Width: 124mm to 290mm in 18.5mm steps (With Extensions at 100mm) - Armrest Stack: 60mm (no riser kit) to 130mm in 5mm increments (With aftermarket Riser Kit) - The extension length and rotation can be easily adjusted using the top bolt. There are 100 distinct position options achievable just by moving the armrests. Combine that with the risers and this bar offers 1500 possible configurations. As a clip-on bar it is also possible to adjust the extension width and tilt easily. This is the most adjustable clip-on bar on the market (and in history). It is worth noting that our previous top-level clip-on aerobar, the J4/F35, offered 90 possible configurations. This highlights the significant step forward we’ve made with our new generation aerobars in allowing riders to precisely adjust their position. Origin - After we released the Supersonic (J5) as a premium bracket with market-leading fit options and versatility we wanted to bring the same kind of options to the rest of our range of brackets and thus aerobars. By simplifying the extension clamp and shifting the wing forward to the bar center line we were able to meet our targets. As a consequence of the simplification the Sonic is the lightest of our current brackets. - The Ergo armrest shares the flippable design of the rest of our new generation armrests. By swapping sides or rotating the armrests smaller increments of movement are achieved – making it simple to fine-tune a riders position or match the position from their previous aerobar or bike. Extensions - Extension Shape: A 50a extensions offer a 50° ski bend shape. The 50a offer a 7.5mm lateral shift per side. This allows the rider to get their hands narrower or wider without tilting the extensions so much that the shifters touch. - Bracket: Sonic - Clamp Diameter: 31.8mm (26.0 w/Shims) - Armrest: Ergo / 10mm Pads - Armrest Width: 124mm to 290mm in 18.5mm steps (with Extensions at 100mm) - Armrest Offset: -70mm to -2.5mm in 7.5mm steps - Armrest Stack: The minimum is 60mm and the bracket is compatible with our existing risers which add up to 130mm stack with (70mm of spacers added) - Weight: 559g

Get ready to get fast with Vision's Team Clip-Ons. The butted-aluminum J-bend extensions are light and stiff, plus they feature fully internal cable routing. You'll also love the 3-position carbon arm rests with supportive foam pads for dialing in your ideal aero position.

- Shiftable guide for SRAM and Shimano 2X cranks - Patented removable skid - Dual 9t sealed-bearing pulley design for superior chain management - BB, ISCG and ISCG-05 mounting options, 136g

- Compatible with Contact SLR Aero handlebar

- Zinc plated for durability - All screws grade 12.9 - 475 Pieces Kit contains: - M5 X 10 Button Head qty. 20 - M5 X 12 Button Head qty. 20 - M5 X 16 Button Head qty. 20 - M5 X 12 Socket, Zinc qty. 35 - M5 X 16 Socket, Zinc qty. 35 - M5 x 20 Socket, Zinc qty. 15 - M5 X 25 Socket, Zinc qty. 10 - M5 X 30 Socket, Zinc qty. 10 - M5 X 12 Flat Socket Head, Spd qty. 25 - M5 X 16 Flat Socket Head, Spd qty. 25 - M5 X 8 Flat Socket, Zinc qty. 20 - M5 Nut qty. 50 - M5 Nylock Nut, Zinc qty. 40 - M5 Acorn Nut, Zinc qty. 10 - M5 Flat Washer qty. 65 - M5 Oversized Flat Washer qty. 25 - M5 Lockwasher qty. 25 - M5 Toothed, Zinc qty. 25

Specialized's C50 carbon extensions allow for a low aggressive aero position or a high-leverage position for climbing. Their 22.2mm outer diameter is compatible with many standard aftermarket aerobar clamps, and at 400mm long, they can be cut to fit your specific reach.

The VukaClip is all about providing the ultimate in fit, security, and adjustability for you to be faster and more efficient in your triathlon or time-trial aero position at an affordable price. Redesigned to be easier to set up and adjust. The VukaClip is available with an above-bar or below-bar mounting system for achieving an optimized aero position. The VukaClip also has a large, redesigned armrest to reduce pressure points and increase comfort. The VukaClip is made with the industry-standard 22.2mm clamp diameter for maximum versatility, making it compatible with Vuka Alumina extensions, the Vuka Carbon Extensions as well as most extensions on the market. Features - Fit, security, and adjustability - Above-bar or below-bar mounting system - Compatible with most extensions

- Minimalist double butted aluminum extensions designed for draft legal Triathlons (ITU and UCI approved) - Composite adjustable armrests, a one piece composite aero bridge and molded armrest pads

RockShox Reverb Remote Assembly for A2 and B1 generation Reverb dropper seatposts. - Includes remote Lever, MMX clamp, Discrete Puck, 1500mm of new hose, new hose barb, and new hose strain relief - Works with A2 and B1 generation posts - A2 posts have a black return speed adjuster on the remote and no laser-etched logos on stanchion by the saddle cradle. - B1 posts have a black return speed adjuster on the remote and "ROCKSHOX" laser-etched logos on stanchion by the saddle cradle.

Shimano's Di2 electric drivetrain takes shifting to the next level. Two Di2 Battery Chargers are available. Choose the model designed for your system's battery. An additional power cable is required for the external-style battery charger (sold separately). These chargers fully charge the battery in 90 minutes.

A higher quality spring greatly improves the performance of your coil shock. VALT springs from Cane Creek are much lighter than traditional steel springs while pushing the boundaries of performance and durability. - Inner diameter of 36.5mm is compatible with all Cane Creek coil shocks - Also compatible with Manitou, Marzocchi, XFusion, ELKA/MRP, BOS and DSP - Compatible with Fox coil shocks with required spring clip adaptor

Comprehensive shop kit for bottom bracket and cassette/freewheel spacing need. 139 pieces in a durable plastic storage box. Kit includes: - (20) 1.0mm FW Spacers - (10) 1.5mm FW Spacers - (10) 2.0mm FW Spacers - (10) NCS-4.5mm Cassette Spacers - (10) SHIM-.3MM Spacers - (10) SHIM-.5MM Spacers - (8) 0.5mm 24mm ID Spacers - (8) 1.0mm 24mm ID Spacers - (8) 2.5mm 24mm ID Spacers - (4) BB30-CLIPs - (4) BB30/PF30 Wave Washers - (4) GXP Wave Washers - (4) .7mm Bottom Bracket Spacers - (4) 1.8mm Bottom Bracket Spacers - (9) 2.5mm Bottom Bracket Spacers - (8) 0.5mm 30mm ID Spacers - (8) 1.0mm 30mm ID Spacers

Shimano Di2 External Battery Mounts - All Di2 components on the bicycle require the same firmware version. Using Di2 components with different firmware versions may cause malfunctions - Use Di2 system checker to update component firmware

Shimano Di2 External Battery Mount - All Di2 components on the bicycle require the same firmware version. Using Di2 components with different firmware versions may cause malfunctions - Use Di2 system checker to update component firmware

Giant's Connect SL Clip-On Aerobar Clamps are made of light and durable aluminum with foam padded arm rests. These clamps feature wide-range arm-rest adjustability and simple single-bolt adjustments.

Giant's Connect SL S-Bend Carbon Aerobar Extensions are for use with Giant's Clip-On Aerobar Clamps (sold separately). This model features the S-Bend. Thanks to carbon construction, these are featherweight and super-stiff extension bars. Plus, they have 70mm of fore/aft adjustment to dial in your ideal aero position.

Giant's Connect SL Ski-Bend Carbon Aerobar Extensions are for use with Giant's Clip-On Aerobar Clamps (sold separately). This model features the ski-jump bend. Thanks to carbon construction, these are featherweight and super-stiff extension bars. Plus, they have 70mm of fore/aft adjustment to dial in your ideal aero position.

-Seatpost clamp for Propel Advanced ISP models (2013-2016)

- Includes stock replacement retainers for headsets, bottom brackets and hubs - Headsets: (8) 5/32"x22, (8) 5/32"x16, (8) 3/16"x15, (24) 5/32"x20; - Bottom brackets: (12) 1/4"x9, (16) 5/16"x9, (16) 5/16"x10 - Hubs: (8) 3/16"x7, (16) 1/4"x7