- Powdercoated steel body with 9mm skewer & hole in handle for padlock
Delta's pre-aligned positioning bike hitch allows for easy fork installation. It features special anti-rust treatment with a tough powder-coat finish. This ultra-rigid 9mm skewer allows you to easily carry your front wheel with a Delta Wheel Hitch or Wheel Holder (each sold separately). - Pre-aligned positioning for easier fork installation - Special anti-rust treatment with tough powder-coat finish - Features patented Delta locking lever - Base Dimensions 4" x 1.5" x 1.75" - Mounting Holes 3" center to center - Ultra-rigid 9mm skewer - Carry your front wheel with a Delta Wheel Hitch (sold separately)
Delta's Wheel Holder mounts to any flat surface to keep bikes stabilized. - Holds front wheel in place - Rigid steel stays with 9mm dropouts - Mounts to any flat surface
- For carrying unique frames on hang-on type car racks - Quick release clamp adjusts to fit between stem and seatpost - Rubberized hooks protect bikes finish
The Hollywood T975 is a 15mm thru-axle bike mount that bolts to any solid surface. Simply loosen your quick release lever and remove the axle from the front wheel. Place the bike's fork dropouts onto the 975 bike mount and slide the axle back through both the fork dropouts and the 975 bike mount. Tighten and secure.
The locking threaded hitch pin comes and 8’ security cable allows you to lock the rack to vehicle, and the cable allows you to locks bikes to rack and/or vehicle.
The Rack Valet is the first mobile bike rack storage and transportation system. Easily attach your bike rack into either the 1-1/4" or 2" slot on the rack valet and then roll it out to your vehicle. Some bike Racks can weight up to 90 pounds, so save yourself the trouble (and back pain) and roll your rack right out to your car.
Hollywood's Sport Rider SE2 2-Bike Add-on Kit lets you carry an additional 2 bikes on your next adventure. It connects easily by sliding the add-on kit into the base unit (sold separately), inserting the attachment pin & clip, then tightening the lever. - Weight: 45 lbs - Capacity: 2 bikes, max 45 lbs per bike - Fits models HR1450, HR145R, and HRT220 - Space between bikes: 10 inches - Not to be used on any trailer, fifth wheel, or towed vehicle
For around-town jaunts and cross-country excursions, Hollywood's Road Runner 3 is a great solution for carrying three bikes. Hollywood's rubber separators with integrated straps and a lower tie-down bar hold the bikes fast and ensure they won't bump each other. And, even when loaded, this rack easily tilts out of the way for rear access, and it folds down when not in use. Plus, Hollywood's No-Wobble system eliminates slack between the hitch and rack for extra stability. The Road Runner 3 also includes a keyed-alike locking hitch pin and 8-foot locking cable for total security and convenience. • Weight: 31 lbs • Max weight capacity: 35 lbs per bike • Not to be used on any trailer, fifth wheel, or towed vehicle
For around-town jaunts and cross-country excursions, Hollywood's Road Runner 3 Extended is great for carrying three bikes. The extended 13-inch distance from the face of the hitch to the back of the rack allows it to fit around an external spare tire. Hollywood's rubber separators with integrated straps and a lower tie-down bar hold the bikes fast and ensure they won't bump each other. Even when loaded, this rack easily tilts out of the way for rear access, and it folds down when not in use. Plus, Hollywood's No-Wobble system eliminates slack between the hitch and rack for extra stability. The Road Runner 3 also includes a keyed-alike locking hitch pin and 8-foot locking cable for total security and convenience. • Weight: 33 lbs • Max weight capacity: 35 lbs per bike • 13 inches from face of hitch to the back of the rack • Not to be used on any trailer, fifth wheel, or towed vehicle
Kuat Racks Phat Bike Kit. This item includes the strap extender for the rear tire strap and a secondary Velcro strap for the front tire.
We've all had a friend like The Dirtbag at some point in our lives. He's cheap and a little rough around the edges. Not the kind of guy you'd want to introduce to your business associates, but he's dependable and always makes for a good time. The Dirtbag is the most affordable rack on the market, it's easy to use and can be easily bolted to just about anything.
Thru-axle adapter for the Kuat TRIO rack.
Fat bike skewer and thru axle tube adapters for the Küat Trio roof rack.
Kuat's Dirtbag may not be the prettiest thing out there, but it's strong, dependable, and mounts just about anywhere. Just bolt this little guy up to a solid surface, then remove your front wheel, thread in your 15mm through axle, and you're all set. This mount fits most 15 x 142mm fat bike forks.
Kuat's lock comes with a burlap bag, dust cap, two keys, and a Küat keychain bottle opener. 3/8" pin is for their 1.25" racks and the 1/2" pin is for their 2" racks.
Fat bike skewer and thru axle tube adapters for the Kuat Trio roof rack.
This fork mount roof rack can handle any bike. Really. That bike you’re thinking of? Yes. Featuring the 3 Way fork-mount system, the TRIO can handle any bike you own. Top that off with a slim line design, security system, and rugged good looks, and you have the most complete fork-mount rack ever designed. 3 Way Fork Mount System - 3 Way fork mount system can handle any bike you own - Fits 9, 12, 15, & 20 mm forks with size-specific adapters - Adapters included with the TRIO: 9x100, 15x100, and 15x110 - Additional adapters available Additional Details - Easy Fit: Mounts to most factory and all aftermarket cross bars (max crossbar size: 3.5” wide by 1.5” thick) - Carrying capacity: 1 Bike Capacity (45lbs max) - Aerodynamic & Low Profile - Integrated Cable Lock (locks both frame and rear wheel): Style and security all at seven pounds - Sliding rear tire strap - Weight: 7lbs
You know all the secret spots, the best trails, and the best places to get a post-ride burger. You're awesome! Everyone want's to ride with you, set up shuttles, and rip some trail. One problem though—you've only got room for 2 bikes. What kind of shuttle buddy would you be if you let something like that become a problem? Thankfully, Kuat makes the NV Add-On for your trusty 2-inch receiver NV rack. It bolts on to the end of your NV and makes your 2-bike hauler a 4-bike carrier. It even retains all the great features of the NV, like the Trail Doc repair stand, integrated cable lock, easy tilt lever, and hand tightening anti-wobble cam. Best part about it? It's easily removable, so you can always say you don't have room when you want to ride solo. Features • Compatible with 2" NV, the Add-On increases NV's capacity to carry up to FOUR bikes (40 lbs. each) • Total carrying capacity of up to 160 lbs. • Integrated cable lock for security • Compatible with TRAIL DOC repair-stand for quick fixes on-the-go • Front and rear tire ratchets make loading and unloading a breeze Specs • Weighs only 30 lbs assembled (Add-On Only) • Accommodates up to a 48" wheelbase • Fits 20" - 29" wheels • Fits up to a 3" tire
$498.00 - $498.99
The all-new aluminum Sherpa 2.0 resets the standard for user-friendly adventure. Folding tire cradles create an abundance of clearance while Kuat's foot-actuated pivot lever lets you bask in the glory of carrying a bike or eating a breakfast burrito while unfolding your rack at the same time. With features designed around your lifestyle, this lightweight rack is as easy to take off as it is to leave on. - Re-designed pivot with optional foot assist - Semi-integrated bike lock - Front tire ratchet design with an intuitive release - Rear tire cradle features a co-molded strap to protect wheels - Folding front cradle adds space between rack and vehicle - No-tool install with hand tight hitch cam system - Gloss metallic powder available in 3 colors - Low profile arced design delivers an amazing look - 2 Bike capacity up to 40 lbs. each - Holds wheelbases up to 47-inch and tires as large as 3-inch - Increased spacing between bikes to 14-inch - Lightweight platform rack design as low as 32lbs (assembled) - Available in both 2-inch & 1.25-inch hitch sizes
$149.99 - $160.00
- Outer pad is constructed of 600D + PVC. A durable denier fabric with herringbone weave and DWR treatment for water repellency - Micro-brushed inner lining protects your tailgate from rub and wear marks - Raised bumpers facing into the truck box seat most frames snugly preventing bikes from coming into contact while shuttling - Raised square pads along the outer tailgate (small pad only) offer the additional security of holding forks in place - When the shuttle gets steep and rowdy, secure frames down with a Velcro-backed webbing loop and strap system - Grommet system offers the ability to lock bikes - Storage pocket - Two sizes - Small - 39.5" x 57" wide with 5 straps, Large - 47” x 61” wide with 6 straps
Replacement snap-in nylon shims for the RockyMounts DriveShaft product line. Shims enable DriveShafts to carry a thru-axle equipped bike. Shims can be used on RockyMounts DriveShaft, DriveShaft HM, and DriveShaft SD.
Some of the best ideas are home grown in Colorado, and The Fattie is one of them. Easily convert your BrassKnuckles rack to fit your fat bike–the kit includes a larger wheel chock and 2 ratchet strap extenders.
The RockyMounts LoBall Locking is a bolt-on bike rack for trucks, trailers, vans, SUV's, and home storage. It includes a locking 9mm quick release, lock core, and two keys.
RockyMounts StreetRod is a thru-axle adapter that works with fork-mounted bike racks from any manufacturer. It includes axles to accommodate bikes with 12x100, 15x100, and "Boost" 15x110 thru-axles.
Secure your through-axle-equipped bike to your fork mount bike rack (sold separately) with RockyMounts' DriveShaft. This adapter allows you to quickly and easily mount a bike with a 15mm or 20mm through-axle fork to your quick-release fork mount rack. It also comes with a lock for peace of mind.
$199.95 - $219.95
RockyMount's Brass Knuckles rack gets your bike from point A to point B with the minimum of hassle and the maximum of security. The aluminum arm uses finely indexed ratcheting to hold front bike wheels from 20- to 29-inches with widths from skinny road tires to fat DH monsters. Form-fitting mounting hardware plays nicely with almost any roof-mounted bars: round, square, or aero. When your bike isn't on the roof, the arm folds down for an extremely low profile for minimal wind noise and maximum gas mileage. For extra security, you can lock the bike to the rack and the rack to your car with lock cores (sold separately).
The WestSlope is a wallet-friendly, feature-filled and clean platform hitch rack. The frame body is sloped to create a tiered mounting arrangement that eliminates handlebar interference between the bikes. By using a soft-touch wheel hook and a ratcheted swing arm, the WestSlope provides a secure fit with zero frame contact. - Carries 2 bikes, up to 40 lbs each - Tire Width: 19mm road bike tires - 3.0-inch mountain bike tires - Wheel Diameter: 20-inch - 29-inch - Wheelbase: 34-inch - 48-inch - Fits both 1.25-inch and 2-inch hitches with adapter sleeve & anti wobble bolt - Tiered mounting eliminates handlebar interference between bikes - No contact with frame, secures bicycle by front wheel - Folds flat against the vehicle, and tilts down 30 degrees to allow for hatch access - WestSlope Lock Kit sold separately
Simply insert Saris' Hitch Tite into the hitch receiver to give your Saris bike rack (sold separately) extra stability. The Hitch Tite is compatible with the Bike Porter Hitch 2-Bike, Freedom, Axis Steel, Axis Aluminum, Cycle-On, and T-RAX Sport racks.
Saris' Protect-O-Pads are foam blocks that separate and protect your bikes when multiple bikes are being transported. They come in packs of four.
Page 1 of 9 Next page